Novoferm Toothed Belt for NovoPort Garage Door Operators
Novoferm timing belt suitable for all Novoferm Novoport, Siebau ATS 24 garage door operatorsThis Novoferm timing belt is suitable for all common door heights. It is delivered with connector. For door heights of more than 3.0 m, the Marantec timing belt, suitable for the Marantec SZ-11 rail, type 1, can be used (article number 83737). This timing belt is identical and has a length of 5.92 m.
Please note: the Marantec timing belt will be delivered without fitting. However, you might remove the fitting from the old timing belt and reuse it.
- Manufacturer: Novoferm
- Product Name: Timing Belt
- Article number: 80805102 / TM15054001150
- Timing belt length: approx. 3,800 mm + Metal fitting approx. 20 mm = approx. 3,820 mm
- Width: approx. 10 mm
- Suitable for:
- Garage door drive Novoferm NovoPort I
- Garage door drive Novoferm NovoPort II
- Garage door drive Siebau ATS 24
- suitable for all common door heights
If the guide rollers on your Novoferm door drive are also defective, you can order these under this article number: 80800100 | TM15050210150 (NovoPort guide rollers / rollers, 2-pack).
We are offering genuine Novoferm timing belst as a replacement for your defective timing belt. It is a maintenance-free component. The regular mechanical load causes signs of abrasion and fatigue on the installed toothed belt. Over time, these widen and it comes to a defect, the timing belt breaks.
Unlock your door drive. Then remove the defective toothed belt from the guide rail of your sectional door. Please memorize the running paths of the timing belt. Details can be found in the assembly instructions of your door, which you can find on the respective product page in our shop. Now insert the toothed belt into the track, beginning at the rear of the gate, pass it through the unlocked drive and on to the floor. Here you hook the tail. Tighten the timing belt at the top of the gate and remove excess material. Finally, the garage door drive has to perform a learn trip.
|Shipping weight:||0,25 Kg|